Reference Guide

netbios-name-server
Specify the NetBIOS Windows Internet Naming Service (WINS) name servers, in order of preference, that are available
to Microsoft Dynamic Host Configuration Protocol (DHCP) clients.
C-Series, S-Series, Z-Series, S4810
Syntax
netbios-name-server address [address2...address8]
Parameters
address Enter the address of the NETBIOS name server. You may enter up to
eight, in order of preference.
Defaults none
Command Modes DHCP <POOL>
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 8.2.1.0 Introduced on the C-Series and S-Series.
netbios-node-type
Specify the NetBIOS node type for a Microsoft DHCP client. Dell Force10 recommends specifying clients as hybrid.
C-Series, S-Series, Z-Series, S4810
Syntax
netbios-node-type type
Parameters
type Enter the NETBIOS node type:
• Broadcast: Enter the keyword b-node.
• Hybrid: Enter the keyword h-node.
• Mixed: Enter the keyword m-node.
• Peer-to-peer: Enter the keyword p-node.
Defaults Hybrid
Command Modes DHCP <POOL>
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 8.2.1.0 Introduced on the C-Series and S-Series.
668