Reference Guide

Defaults none
Command Modes DHCP <POOL>
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 8.2.1.0 Introduced on the C-Series and S-Series.
excluded-address
Prevent the server from leasing an address or range of addresses in the pool.
C-Series, S-Series, Z-Series, S4810
Syntax
excluded-address [address | low-address high-address]
Parameters
address Enter a single address to be excluded from the pool.
low-address Enter the lowest address in a range of addresses to be excluded from
the pool.
high-address Enter the highest address in a range of addresses to be excluded
from the pool.
Defaults none
Command Modes DHCP
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 8.2.1.0 Introduced on the C-Series and S-Series.
hardware-address
For manual configurations, specify the client hardware address.
C-Series, S-Series, Z-Series, S4810
Syntax
hardware-address address
Parameters
address Enter the hardware address of the client.
Defaults none
Command Modes DHCP <POOL>
Command History
Version 8.3.11.1 Introduced on the Z9000.
666