Reference Guide

Related
Commands
clear hardware system-flow – clears the statistics from selected hardware components.
show interfaces stack-unit – displays information on all interfaces on a specific S-Series stack
member.
show processes cpu (S-Series) – displays the CPU usage information based on the processes
running in an S-Series.
show system (S-Series and Z-Series) – displays the current status of all the stack members or
a specific member.
show hardware system-flow
Display Layer 3 ACL or QoS data for the selected stack member and stack member port-pipe.
S-Series, Z-Series
Syntax
show hardware system-flow layer2 stack-unit id port-set 0-3
[counters]
Parameters
acl | qos For the selected stack member and stack member port-pipe, display
which system flow entry the packet hits and what queue the packet
takes as it dumps the raw system flow tables.
stack-unit id Enter the keywords stack-unit to select a stack member ID. The
unit ID range for Z9000 is 0.
port-set 0-3
[counters]
Enter the keywords port-set with a port-pipe number, 0 or 3.
NOTE: The S25 models of the S-Series have only port-pipe 0.
(OPTIONAL) Enter the keyword counters to display hit counters for
the selected ACL or QoS option.
Defaults none
Command Modes EXEC Privilege
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 7.8.1.0 Introduced on the S-Series.
Example
FTOS#show hardware system-flow layer2 stack-unit 0 port-set 0
counters
-----------------------------------------------------------
EntryId Description #HITS
-----------------------------------------------------------
2048 STP BPDU Redirects 0
2047 LLDP BPDU Redirects 0
2045 LACP traffic Redirects 0
2044 GVRP traffic Redirects 0
2043 ARP Reply Redirects 0
2042 802.1x frames Redirects 0
2041 VRRP frames Redirects 0
2040 GRAT ARP 0
2039 DROP Cases 0
2038 OSPF1 STUB 0
660