Reference Guide

clear hardware system-flow
Clear system-flow statistics from selected hardware components.
Syntax
clear hardware system-flow layer2 stack-unit number port-set
number counters
Parameters
stack-unit
number
Enter the keywords stack-unit then a number to select a
particular stack member and then enter one of the following
command options to clear a specific collection of data.
port-set number
counters
Enter the keywords port-set along with a port-pipe number, then
the keyword counters to clear the system-flow counters on the
selected port-pipe.
Defaults none
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, refer to the
relevant FTOS Command Line Reference Guide .
The following is a list of the FTOS version history for this command.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.11.0 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Introduced on the S-Series.
Related
Commands
show hardware stack-unit — displays the data plane or management plane input and output
statistics of the designated component of the designated stack member.
hardware watchdog
Set the watchdog timer to trigger a reboot and restart the system.
S-Series, Z-Series
Syntax
hardware watchdog
Defaults Enabled.
Command Modes CONFIGURATION
Command History
Version 8.3.11.0 Introduced on the Z9000.
Version 7.8.1.0 Introduced on the S-Series.
652