Reference Guide

Usage
Information
The PVST sub-partition requires a minimum number of entries when employing PVST+. For the
E-Series, refer to the “CAM” chapter of the FTOS Configuration Guide .
Related
Commands
show cam-l2acl – displays the percentage of the Layer 2 ACL CAM partition that is allocated to
each Layer 2 ACL CAM sub-partition.
show cam-l2acl
Display the percentage of the Layer 2 ACL CAM partition that is allocated to each Layer 2 ACL CAM sub-partition. If
configuration has changed, the command displays the current configuration and the configuration that FTOS will write to
the CAM after the next chassis reboot.
TeraScale
Syntax
show cam-l2acl
Command Modes EXEC Privilege
Command History
Version 7.7.1.0 Introduced on the E-Series.
Example
FTOS#show cam-l2acl
-- Chassis Cam L2-ACL --
Current Settings(in percent)
Sysflow : 6
L2Acl : 14
Pvst : 50
Qos : 12
L2pt : 13
Frrp : 5
-- Line card 1 --
Current Settings(in percent)
Sysflow : 6
L2Acl : 14
Pvst : 50
Qos : 12
L2pt : 13
Frrp : 5
-- Line card 5 --
Current Settings(in percent)
Sysflow : 6
L2Acl : 14
--More--
Related
Commands
cam-l2acl (CONFIGURATION) – re-allocates the amount of space, in percentage, for each
Layer 2 ACL CAM sub-partition.
598