Reference Guide

-- Line card 2 --
Current Settings Next Boot
Acl : 5K 0K
Multicast Fib/Acl : 9K 12K
Pbr : 1K 1K
Qos : 8K 8K
System Flow : 5K 5K
Trace Lists : 1K 1K
-- Line card 8 --
Current Settings Next Boot
Acl : 5K 0K
Multicast Fib/Acl : 9K 12K
Pbr : 1K 1K
Qos : 8K 8K
System Flow : 5K 5K
Trace Lists : 1K 1K
-- Line card 13 --
Current Settings Next Boot
Acl : 5K 0K
Multicast Fib/Acl : 9K 12K
Pbr : 1K 1K
Qos : 8K 8K
System Flow : 5K 5K
Trace Lists : 1K 1K
FTOS#
Related
Commands
cam-ipv4flow (CONFIGURATION) — configures the amount of CAM space in IPv4flow sub-
regions.
CAM Layer 2 ACL Commands
IPv4Flow sub-partitions are supported on the E-Series TeraScale platform.
The 18-megabit user-configurable CAM is divided into multiple regions such as Layer 2 FIB, Layer 3 FIB, IPv4Flow, IPv4
Ingress ACL, etc. The Layer 2 ACL region is further sub-divided into six regions: Sysflow, L2ACL, PVST, QoS, L2PT, and
FRRP.
You can change the amount of CAM space, in percentage, allocated to each sub-region. The amount of space that you
can distribute to the sub-partitions is equal to the amount of CAM space that the selected CAM profile allocates to the
Layer 2 ACL partition. FTOS requires that you specify the amount of CAM space for all sub-partitions and that the sum of
all sub-partitions is 100%.
Like CAM profiles, you can configure the Layer 2 ACL partition from EXEC Privilege mode or CONFIGURATION mode.
cam l2acl (EXEC Privilege)
Re-allocate the amount of space, in percentage, for each Layer 2 ACL CAM sub-partition.
NOTE: This command is deprecated as of FTOS version 8.3.1.0.
596