Reference Guide

pbr value Enter the keyword pbr followed by the number of entries for the PBR
sub-region in 1K increments. The range is 1 to 32 KB. The default is 1
KB.
qos value Enter the keyword qos followed by the number of entries for the QoS
sub-region in 1K increments. The range is 1 to 32 KB. The default is
8
KB.
system-flow
value
Enter the keywords system-flow followed by the number of
entries for the system-flow sub-region in 1K increments. The range is
4 to 32 KB. The default is 5 KB.
trace-list value Enter the keywords trace-list followed by the number of entries
for the trace-list sub-region in 1K increments. The range is 1 to 32 KB.
The default is
1 KB.
Defaults See Parameters.
Command Modes CONFIGURATION
Command History
Version 6.3.1.0 Introduced on the E-Series.
Usage
Information
CAM profile changes take effect after the next chassis reboot.
Related
Commands
copy – saves the running configuration.
show cam-ipv4flow – displays the CAM IPv4flow entries.
show cam-ipv4flow
Display details about the IPv4Flow sub-regions.
TeraScale
Syntax
show cam-ipv4flow
Command Modes EXEC Privilege
Command History
Version 6.3.1.0 Introduced on the E-Series.
Usage
Information
If the IPv4Flow sub-region has been changed, this command displays the current IPv4Flow
configuration in one column and in the other column displays the IPv4Flow configuration that
will be loaded after the next reboot.
Example (C-
Series)
FTOS#show cam-ipv4flow
-- Chassis Cam Ipv4Flow --
Current Settings Next Boot
Acl : 8K 5K
Multicast Fib/Acl : 9K 12K
Pbr : 1K 1K
Qos : 8K 8K
System Flow : 5K 5K
Trace Lists : 1K 1K
595