Reference Guide

peer-group-name Enter the name of the peer group to send a COMMUNITY attribute to
all routers within the peer group.
Defaults Not configured and COMMUNITY attributes are not sent to neighbors.
Command Modes ROUTER BGPV6-ADDRESS FAMILY
Command History
Version 8.2.1.0 Introduced on the E-Series ExaScale.
Version 7.4.1.0 Introduced
neighbor shutdown
Disable a BGP neighbor or peer group.
C-Series, E-Series
Syntax
neighbor {ipv6-address | peer-group-name} shutdown
To enable a disabled neighbor or peer group, use the no neighbor {ipv6-address |
peer-group-name} shutdown command.
Parameters
ipv6-address Enter the IPv6 address in the x:x:x:x::x format.
NOTE: The :: notation specifies successive hexadecimal fields of
zeros.
peer-group-name Enter the name of the peer group to disable or enable all routers
within the peer group.
Defaults Enabled (that is, BGP neighbors and peer groups are disabled.)
Command Modes ROUTER BGP
Command History
Version 8.2.1.0 Introduced on the E-Series ExaScale.
Version 7.4.1.0 Introduced
Usage
Information
Peers that are enabled within a peer group are disabled when their peer group is disabled.
The neighbor shutdown command terminates all BGP sessions on the BGP neighbor or
BGP peer group. Use this command with caution as it terminates the specified BGP sessions.
When a neighbor or peer group is shutdown, use the
show ip bgp summary command to
confirm its status.
Related
Commands
• show ip bgp summary – displays the current BGP configuration.
• show ip bgp neighbors – displays the current BGP neighbors.
525