Reference Guide

clear ip bgp ipv6 unicast soft
Clear and reapply policies for IPv6 unicast routes without resetting the TCP connection; that is, perform BGP soft
reconfiguration.
C-Series, E-Series TeraScale, S4810
Syntax
clear ip bgp {* | as-number | ipv4-neighbor-addr | ipv6-
neighbor-addr | peer-group name} ipv6 unicast soft [in | out]
Parameters
* Clear and reapply policies for all BGP sessions.
as-number Clear and reapply policies for all neighbors belonging to the AS. The
range is 0 to 65535 (2-Byte) 1 to 4294967295 (4-Byte) or 0.1 to .
65535.65535 (Dotted format).
ipv4-neighbor-
addr | ipv6-
neighbor-addr
Clear and reapply policies for a neighbor.
peer-group name Clear and reapply policies for all BGP routers in the specified peer
group.
ipv6 unicast Clear and reapply policies for all IPv6 unicast routes.
in Reapply only inbound policies.
NOTE: If you enter soft, without an in or out option, both
inbound and outbound policies are reset.
out Reapply only outbound policies.
NOTE: If you enter soft, without an in or out option, both
inbound and outbound policies are reset.
Command Modes EXEC Privilege
Command History
Version 8.4.1.0 Added support for IPv4 multicast and IPv6 unicast routes.
Version 7.8.1.0 Introduced on the S4810.
Version 7.7.1.0 Introduced on the C-Series.
Version 7.2.1.0 Introduced on the E-Series TeraScale.
debug ip bgp
Allows you to view all information on BGP, including BGP events, keepalives, notifications, and updates.
C-Series, E-Series
Syntax
debug ip bgp [ipv6-address | peer-group peer-group-name] [in |
out]
To disable all BGP debugging, use the no debug ip bgp command.
503