Reference Guide

debug ip bgp peer-group updates
View information about BGP peer-group updates.
C-Series, E-Series TeraScale, S-Series
Syntax
debug ip bgp peer-group peer-group-name updates [in | out]
To disable debugging, use the no debug ip bgp peer-group peer-group-name
updates [in | out] command.
Parameters
peer-group peer-
group-name
Enter the keywords peer-group followed by the name of the peer-
group.
updates Enter the keyword updates to view BGP update information.
in (OPTIONAL) Enter the keyword in to view only BGP updates
received from neighbors.
out (OPTIONAL) Enter the keyword out to view only BGP updates sent to
neighbors.
Command Modes EXEC Privilege
Command History
Version 7.8.1.0 Introduced on the S-Series.
Version 7.7.1.0 Introduced on the C-Series.
Version 7.6.1.0 Introduced IPv6 MGBP support for the E-Series.
debug ip bgp updates
View information about BGP updates.
C-Series, E-Series TeraScale, S-Series
Syntax
debug ip bgp updates [in | out]
To disable debugging, use the no debug ip bgp updates [in | out] command.
Parameters
updates Enter the keyword updates to view BGP update information.
in (OPTIONAL) Enter the keyword in to view only BGP updates
received from neighbors.
out (OPTIONAL) Enter the keyword out to view only BGP updates sent to
neighbors.
Defaults Disabled.
Command Modes EXEC Privilege
452