Reference Guide

* 63.114.8.33 0 18508 701 7018 ?
* 63.114.8.33 0 18508 209 7018 ?
*> 4.0.0.0/8 63.114.8.60 0 18508 209 1 i
* 63.114.8.34 0 18508 209 1 i
* 63.114.8.33 0 18508 701 1 i
* 63.114.8.33 0 18508 209 1 i
* 6.0.0.0/20 63.114.8.60 0 18508 209 3549 i
* 63.114.8.34 0 18508 209 3549 i
*> 63.114.8.33 0 0 18508 ?
* 63.114.8.33 0 18508 209 3549 i
* 9.2.0.0/16 63.114.8.60 0 18508 209 701 i
* 63.114.8.34 0 18508 209 701 i
--More--
show ip bgp neighbors
Allows you to view the information exchanged by BGP neighbors.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
show ip bgp [ipv4 unicast] neighbors [ip-address [advertised-
routes | dampened-routes | detail | flap-statistics | routes |
{received-routes [network [network-mask]]} | {denied-routes
[network [network-mask]]}]
Parameters
ipv4 unicast (OPTIONAL) Enter the keywords ipv4 unicast to view
information only related to ipv4 unicast routes.
ip-address (OPTIONAL) Enter the IP address of the neighbor to view only BGP
information exchanged with that neighbor.
advertised-routes (OPTIONAL) Enter the keywords advertised-routes to view
only the routes the neighbor sent.
dampened-routes (OPTIONAL) Enter the keywords dampened-routes to view
information on dampened routes from the BGP neighbor.
detail (OPTIONAL) Enter the keyword detail to view neighbor-specific
internal information for the IPv4 Unicast address family.
flap-statistics (OPTIONAL) Enter the keywords flap-statistics to view flap
statistics on the neighbor’s routes.
routes (OPTIONAL) Enter the keyword routes to view only the neighbor’s
feasible routes.
received-routes
[ network
[ network-mask ]
(OPTIONAL) Enter the keywords received-routes followed by
either the network address (in dotted decimal format) or the network
mask (in slash prefix format) to view all information received from
neighbors.
NOTE: You must configure the neighbor soft-
reconfiguration inbound command prior to viewing all
the information received from the neighbors.
431