Reference Guide

MpathCtxAddr 1101111140 : MpathCtxAddrlen 255 : AfEorSet
0x41a19f98 : NumDfrdPfx 0
AfActPeerHd 0x41a1a3a4 : AfExtDist 1101112312 : AfIntDist
200 : AfLocDist 200
AfNumRRc 0 : AfRR 0 : AfNetRttP 0x41a0d300 : AfNetCtxAddr
1101112392 :
AfNetCtxAddrlen 255
AfNwCtxAddr 1101112443 : AfNwCtxAddrlen 255 : AfNetBKDrRttP
0x41a0d500 :
AfNetBKDRCnt 0 : AfDampHLife 0
AfDampReuse 0 : AfDampSupp 0 : AfDampMaxHld 0 : AfDampCeiling
0 : AfDampRmapP
show ip bgp extcommunity-list
View information on all routes with Extended Community attributes.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
show ip bgp [ipv4 unicast] extcommunity-list [list name]
Parameters
ipv4 unicast (OPTIONAL) Enter the keywords ipv4 unicast to view
information only related to ipv4 unicast routes.
list name Enter the extended community list name you wish to view.
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Introduced on the S-Series.
Version 7.7.1.0 Introduced on the C-Series.
Usage
Information
To view the total number of COMMUNITY attributes found, use the show ip bgp
summary
command. The text line above the route table states the number of COMMUNITY
attributes found.
The show ip bgp community command without any parameters lists BGP routes with at
least one BGP community attribute and the output is the same as for the
show ip bgp
command output.
show ip bgp filter-list
View the routes that match the filter lists.
C-Series, E-Series, S-Series, S-Series, S4810
Syntax
show ip bgp [ipv4 unicast] filter-list as-path-name
426