Reference Guide

i
*>i 6.4.0.0/16 205.171.0.16 100 0 209 7170 1455
i
*>i 6.5.0.0/19 205.171.0.16 100 0 209 7170 1455
i
*>i 6.8.0.0/20 205.171.0.16 100 0 209 7170 1455
i
*>i 6.9.0.0/20 205.171.0.16 100 0 209 7170 1455
i
*>i 6.10.0.0/15 205.171.0.16 100 0 209 7170 1455
i
*>i 6.14.0.0/15 205.171.0.16 100 0 209 7170 1455
i
*>i 6.133.0.0/21 205.171.0.16 100 0 209 7170 1455
i
*>i 6.151.0.0/1 205.171.0.16 100 0 209 7170 1455
i
--More--
show ip bgp community-list
View routes that are affected by a specific community list.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
show ip bgp [ipv4 unicast] community-list community-list-name
[exact-match]
Parameters
ipv4 unicast (OPTIONAL) Enter the keywords ipv4 unicast to view
information only related to ipv4 unicast routes.
community-list-
name
Enter the name of a configured IP community list (max 16 characters).
exact-match Enter the keyword for an exact match of the communities.
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Introduced on the S-Series.
Version 7.7.1.0 Introduced on the C-Series.
Usage
Information
The show ip bgp community-list command without any parameters lists BGP routes
matching the Community List and the output is the same as for the
show ip bgp command
output.
The following describes the show ip bgp community-list pass command shown in
the Example below.
422