Reference Guide

neighbor local-as
Configure Internal BGP (IBGP) routers to accept external routes from neighbors with a local AS number in the AS
number path.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
neighbor {ip-address | peer-group-name} local-as as-number [no-
prepend]
To return to the default value, use the no neighbor {ip-address | peer-group-
name} local-as command.
Parameters
ip-address Enter the IP address of the neighbor in dotted decimal format.
peer-group-name Enter the name of the peer group to set the advertisement interval for
all routers in the peer group.
as-number Enter the AS number to reset all neighbors belonging to that AS. The
range is 0 to 65535 (2-byte), 1 to 4294967295 (4-byte) or 0.1 to
65535.65535 (dotted format).
no prepend Specifies that local AS values do not prepend to announcements from
the neighbor.
Defaults Not configured.
Command Modes ROUTER BGP
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Introduced on the S-Series.
Version 7.7.1.0 Introduced on the C-Series.
Related
Commands
bgp four-octet-as-support – enables 4-byte support for the BGP process.
neighbor maximum-prefix
Control the number of network prefixes received.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
neighbor {ip-address | peer-group-name} maximum-prefix maximum
[threshold] [warning-only]
To return to the default values, use the no neighbor {ip-address | peer-group-
name} maximum-prefix maximum command.
Parameters
ip-address Enter the IP address of the neighbor in dotted decimal format.
396