Reference Guide

To disable debugging, use the no debug ip bgp [ip-address | peer-group
peer-group-name] notifications [in | out] command.
Parameters
ip-address (OPTIONAL) Enter the IP address of the neighbor in dotted decimal
format.
peer-group peer-
group-name
(OPTIONAL) Enter the keyword peer-group followed by the name
of the peer group.
in (OPTIONAL) Enter the keyword in to view BGP notifications received
from neighbors.
out (OPTIONAL) Enter the keyword out to view BGP notifications sent to
neighbors
Command Modes EXEC Privilege
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Introduced on the S-Series.
Version 7.7.1.0 Introduced on the C-Series.
Usage
Information
Enter the no debug ip bgp command to remove all configured debug commands for BGP.
debug ip bgp soft-reconfiguration
Enable soft-reconfiguration debug.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
debug ip bgp {ip-address | peer-group-name} soft-
reconfiguration
To disable, use the no debug ip bgp {ip-address | peer-group-name}
soft-reconfiguration
command.
Parameters
ip-address (OPTIONAL) Enter the IP address of the neighbor in dotted decimal
format.
peer-group-name (OPTIONAL) Enter the name of the peer group to disable or enable all
routers within the peer group..
Defaults Disabled
Command Modes EXEC Privilege
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
383