Reference Guide

Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Introduced on the S-Series.
Version 7.7.1.0 Introduced on the C-Series.
Usage
Information
Enter the no debug ip bgp command to remove all configured debug commands for BGP.
debug ip bgp keepalives
Display information about BGP keepalive messages.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
debug ip bgp [ip-address | peer-group peer-group-name]
keepalives [in | out]
To disable debugging, use the no debug ip bgp [ip-address | peer-group
peer-group-name] keepalives [in | out] command.
Parameters
ip-address (OPTIONAL) Enter the IP address of the neighbor in dotted decimal
format.
peer-group peer-
group-name
(OPTIONAL) Enter the keyword peer-group followed by the name
of the peer group.
in (OPTIONAL) Enter the keyword in to view only inbound keepalive
messages.
out (OPTIONAL) Enter the keyword out to view only outbound keepalive
messages.
Command Modes EXEC Privilege
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Introduced on the S-Series.
Version 7.7.1.0 Introduced on the C-Series.
Usage
Information
Enter the no debug ip bgp command to remove all configured debug commands for BGP.
debug ip bgp notifications
Allows you to view information about BGP notifications received from neighbors.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
debug ip bgp [ip-address | peer-group peer-group-name]
notifications [in | out]
382