Reference Guide

debug ip bgp dampening
View information on routes being dampened.
C-Series, E-Series TeraScale, Z-Series, S-Series
Syntax
debug ip bgp ipv4 multicast dampening
To disable debugging, use the no debug ip bgp ipv4 multicast dampening
command.
Parameters
dampening Enter the keyword dampening to clear route flap dampening
information.
Command Modes EXEC Privilege
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 7.8.1.0 Introduced on the S-Series.
Version 7.7.1.0 Introduced on the C-Series.
Version 7.6.1.0 Introduced IPv6 MGBP support for the E-Series.
debug ip bgp events
Display information on local BGP state changes and other BGP events.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
debug ip bgp [ip-address | peer-group peer-group-name] events
[in | out]
To disable debugging, use the no debug ip bgp [ip-address | peer-group
peer-group-name] events command.
Parameters
ip-address (OPTIONAL) Enter the IP address of the neighbor in dotted decimal
format.
peer-group peer-
group-name
(OPTIONAL) Enter the keyword peer-group followed by the name
of the peer group.
in (OPTIONAL) Enter the keyword in to view only events on inbound
BGP messages.
out (OPTIONAL) Enter the keyword out to view only events on outbound
BGP messages.
Command Modes EXEC Privilege
Command History
Version 8.3.11.1 Introduced on the Z9000.
381