Reference Guide

soft (OPTIONAL) Enter the keyword soft to configure and activate
policies without resetting the BGP TCP session, that is, BGP Soft
Reconfiguration.
NOTE: If you enter the clear ip bgp ip-address soft
command, both inbound and outbound policies are reset.
in (OPTIONAL) Enter the keyword in to activate only inbound policies.
out (OPTIONAL) Enter the keyword out to activate only outbound
policies.
<1-4294967295> Enter <1-4294967295> to clear peers with the AS number.
<0.1-65535.65535> Enter <0.1-65535.65535> to clear peers with the AS number in dot
format.
A.B.C.D Enter the BGP neighbor address in the A.B.C.D format to clear.
X:X:X:X::X Enter the BGP neighbor address in the X:X:X:X::X format to clear.
dampening Enter the keyword dampening to clear the flap dampening
information.
flap-statistics Enter the keywords flap-statistics to clear the flap statistics
information.
ipv4 Enter the ipv4 address family to clear.
ipv6 Enter the ipv6 address family to clear.
peer-group Enter the peer-group to clear all members of the peer-group.
Command Modes EXEC Privilege
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 7.8.1.0 Introduced on the S-Series.
Version 7.7.1.0 Introduced on the C-Series.
Version 6.5.1.0 Expanded to include the as-number option.
Related
Commands
bgp recursive-bgp-next-hop – disables next-hop resolution through other routes learned by the
BGP.
bgp soft-reconfig-backup – turns on BGP Soft Reconfiguration.
clear ip bgp dampening
Clear information on route dampening and return the suppressed route to the Active state.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
clear ip bgp dampening [ip-address mask]
377