Reference Guide

capture bgp-pdu max-buffer-size
Set the size of the BGP packet capture buffer. This buffer size pertains to both IPv4 and IPv6 addresses.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
capture bgp-pdu max-buffer-size 100-102400000
Parameters
100-102400000 Enter a size for the capture buffer.
Defaults 40960000 bytes.
Command Modes EXEC Privilege
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Introduced on the S-Series.
Version 7.7.1.0 Introduced on the C-Series.
Version 7.5.1.0 Introduced
Related
Commands
capture bgp-pdu neighbor – enables capture of an IPv4 BGP neighbor packet.
capture bgp-pdu neighbor (ipv6) – enables capture of an IPv6 BGP neighbor packet.
show capture bgp-pdu neighbor – displays BGP packet capture information for an IPv6
address on the E-Series.
clear ip bgp
Reset BGP sessions on the E-Series. The soft parameter (BGP Soft Reconfiguration) clears the policies without resetting
the TCP connection.
C-Series, E-Series, S-Series, Z-Series
Syntax
clear ip bgp * | as-number | ip-address [flap-statistics | soft
[in | out]]
Parameters
* Enter an asterisk ( * ) to reset all BGP sessions.
as-number Enter the AS number to reset all neighbors belonging to that AS. The
range is 0 to 65535 (2-byte), 1 to 4294967295 (4-byte), or 0.1 to
65535.65535 (dotted format).
ip-address Enter an IP address in dotted decimal format to reset all prefixes from
that neighbor.
flap-statistics (OPTIONAL) Enter the keyword flap-statistics to reset the
flap statistics on all prefixes from that neighbor.
376