Reference Guide

Version 7.2.1.0 Introduced.
Usage
Information
When you enable soft-reconfiguration for a neighbor and you execute the clear ip bgp
soft in command, the update database stored in the router is replayed and updates are
reevaluated. With this command, the replay and update process is triggered only if route-
refresh request is not negotiated with the peer. If the request is indeed negotiated (after
executing the clear ip bgp soft in command), BGP sends a route-refresh request to
the neighbor and receives all of the peer’s updates.
Related
Commands
clear ip bgp – activates inbound policies without resetting the BGP TCP session.
capture bgp-pdu neighbor
Enable capture of an IPv4 BGP neighbor packet.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
capture bgp-pdu neighbor ipv4-address direction {both | rx |
tx}
To disable capture of the IPv4 BGP neighbor packet, use the no capture bgp-pdu
neighbor ipv4-address command.
Parameters
ipv4-address Enter the IPv4 address of the target BGP neighbor.
direction {both |
rx | tx}
Enter the keyword direction and a direction—either rx for
inbound,
tx for outbound, or both.
Defaults Not configured.
Command Modes EXEC Privilege
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Introduced on the S-Series.
Version 7.7.1.0 Introduced on the C-Series.
Version 7.5.1.0 Introduced.
Related
Commands
capture bgp-pdu max-buffer-size – specifies a size for the capture buffer.
show capture bgp-pdu neighbor – displays BGP packet capture information.
375