Reference Guide

show ip as-path-access-lists
Display the all AS-PATH access lists configured on the E-Series.
E-Series, S4810
Syntax
show ip as-path-access-lists
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 8.3.7.0 Introduced on the S4810.
Version 8.1.1.0 Introduced on the E-Series ExaScale.
pre-Version
6.1.1.0
Introduced on the E-Series.
Example
FTOS#show ip as-path-access-lists
ip as-path access-list 1
permit ^$
permit ^\(.*\)$
deny .*
ip as-path access-list 91
permit ^$
deny .*
permit ^\(.*\)$
FTOS#
IP Community List Commands
IP Community List commands are supported on the E-Series and S4810 platforms only.
deny
Create a filter to drop routes matching a BGP COMMUNITY number.
E-Series
Syntax
deny {community-number | local-AS | no-advertise | no-export |
quote-regexp
regular-expressions-list | regexp regular-
expression
}
Parameters
community-
number
Enter the community number in AA:NN format where AA is the AS
number (2 bytes) and NN is a value specific to that autonomous
system.
local-AS
Enter the keywords local-AS to drop all routes with the
COMMUNITY attribute of NO_EXPORT_SUBCONFED.
334