Reference Guide

• If set community additive and set as-path prepend are configure, the
communities and AS numbers are prepended.
Related
Commands
set community — specifies a COMMUNITY attribute.
set as-path — configures a filter to modify the AS path.
description
Add a description to this route map.
C-Series, E-Series, S-Series, Z-Series
Syntax
description {description}
To remove the description, use the no description {description} command.
Parameters
description Enter a description to identify the route map (80 characters
maximum).
Defaults none
Command Modes ROUTE-MAP
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.1.1.0 Introduced on the E-Series ExaScale.
pre-Version
7.7.1.0
Introduced.
Related
Commands
route-map – enables a route map.
match as-path
Configure a filter to match routes that have a certain AS number in their BGP path.
C-Series, E-Series, S-Series, Z-Series
Syntax
match as-path as-path-name
To delete a match AS path filter, use the no match as-path as-path-name command.
Parameters
as-path-name Enter the name of an established AS-PATH ACL, up to 140 characters.
Defaults Not configured.
Command Modes ROUTE-MAP
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.1.1.0 Introduced on the E-Series ExaScale.
311