Reference Guide

• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE and then enter the slot/port information.
in | out Identify whether ACL is applied on ingress or egress side.
Command Modes EXEC Privilege
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.5.1.0 Added support for 4-port 40G line cards on ExaScale.
Version 8.4.1.0 Introduced.
show mac accounting access-list
Display MAC access list configurations and counters (if configured).
C-Series, E-Series, S-Series, Z-Series
Syntax
show mac accounting access-list access-list-name interface
interface in | out
Parameters
access-list-name Enter the name of a configured MAC ACL, up to 140 characters.
interface
interface
Enter the keyword interface followed by the one of the following
keywords and slot/port or number information:
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet and then enter the slot/port
information.
• For a Port Channel interface, enter the keyword port-
channel
and then enter a number. The C-Series and S-
Series Range is 1 to 128. The E-Series range is 1 to 255 for
TeraScale and 1 to 512 for ExaScale.
• For a SONET interface, enter the keyword sonet and then
enter the slot/ port information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet and then enter the slot/port
information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE and then enter the slot/port information.
in | out Identify whether ACL is applied on ingress or egress side.
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.5.1.0 Added support for 4-port 40G line cards on ExaScale.
290