Reference Guide

Parameters
interval seconds (Optional) Enter the keyword interval followed by the interval
time, in seconds, after which reauthentication is initiated. The range
is 1 to 31536000 (one year). The default is
3600 (1 hour).
Defaults 3600 seconds (1 hour)
Command Modes INTERFACE
Command History
Version 8.3.12.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the C-Series and S-Series.
Version 7.4.1.0 Introduced on the E-Series.
dot1x reauth-max
Configure the maximum number of times a port can reauthenticate before the port becomes unauthorized.
C-Series, E-Series, S-Series, S4810
Syntax
dot1x reauth-max number
To return to the default, use the no dot1x reauth-max command.
Parameters
number Enter the permitted number of reauthentications. The range is 1 to 10.
The default is 2.
Defaults 2
Command Modes INTERFACE
Command History
Version 8.3.12.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the C-Series and S-Series.
Version 7.4.1.0 Introduced on the E-Series.
dot1x server-timeout
Configure the amount of time after which exchanges with the server time-out.
C-Series, E-Series, S-Series, S4810
Syntax
dot1x server-timeout seconds
To return to the default, use the no dot1x server-timeout command.
230