Reference Guide

traceroute ethernet
Send a linktrace message to an MEP.
S-Series, S4810
Syntax
traceroute ethernet domain [name | level] ma-name remote {mep-
id mep-id | mac-addr mac-address}
Parameters
domain name |
level
Enter the keyword domain and then enter the domain name or level.
ma-name ma-
name
Enter the keyword ma-name and then enter the maintenance
association name.
mepid mep-id Enter the MEP ID that is the trace target.
mac-addr mac-
address
Enter the MAC address of the trace target.
Defaults none
Command Modes EXEC Privilege
Command History
Version 8.3.7.0 Introduced on the S4810.
Version 8.3.1.0 Introduced on the S-Series.
220