Reference Guide

show ethernet cfm maintenance-points remote
Display the MEP Database.
S-Series, S4810
Syntax
show ethernet cfm maintenance-points remote detail [active |
domain {level | name} | expired | waiting]
Parameters
active Enter the keyword active to display only the MEPs in active state.
domain [ name |
level ]
Enter the keyword domain and then enter the domain name or
domain level.
expired Enter the keyword expired to view MEP entries that have expired
due to connectivity failure.
waiting Enter the keyword waiting to display MEP entries waiting for
response.
Defaults none
Command Modes EXEC Privilege
Command History
Version 8.3.7.0 Introduced on the S4810.
Version 8.3.1.0 Introduced on the S-Series.
Example
FTOS#show ethernet cfm maintenance-points remote detail
MAC Address: 00:01:e8:58:68:78
Domain Name: cfm0
MA Name: test0
Level: 7
VLAN: 10
MP ID: 900
Sender Chassis ID: Force10
MEP Interface status: Up
MEP Port status: Forwarding
Receive RDI: FALSE
MP Status: Active
show ethernet cfm mipbd
Display the MIP database.
S-Series, S4810
Syntax
show ethernet cfm mipdb
Defaults none
215