Reference Guide

ping ethernet
Send a loopback message.
S-Series, S4810
Syntax
ping ethernet domain [name l level] ma-name ma-name remote
{dest-mep-id | mac-addr mac-address} source {src-mep-id | port
interface}
Parameters
name | level Enter the domain name or level.
ma-name ma-
name
Enter the keyword ma-name and then enter the maintenance
association name.
dest-mep-id Enter the MEP ID that is the target of the ping.
mac-addr mac-
address
Enter the keyword mac-addr and then enter the MAC address that
is the target of the ping.
src-mep-id Enter the MEP ID that originates the ping.
port interface Enter the keyword port and then enter the interface that originates
the ping.
Defaults none
Command Modes EXEC Privilege
Command History
Version 8.3.7.0 Introduced on the S4810.
Version 8.3.1.0 Introduced on the S-Series.
show ethernet cfm domain
Display maintenance domain information.
S-Series, S4810
Syntax
show ethernet cfm domain [name | level | brief]
Parameters
name | level Enter the maintenance domain name or level.
brief Enter the keyword brief to display a summary output.
Defaults none
Command Modes EXEC Privilege
213