Manualshelf

Reference Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S4810P
201202203204205206207208209210
5
802.1ag
802.1ag is available only on the Dell Force10 S-Series and S4810 platforms.
ccm disable
Disable continuity check message (CCM).
S-Series, S4810
Syntax
ccm disable
Enter no ccm disable to enable CCM.
Defaults Disabled
Command Modes ECFM DOMAIN
Command History
Version 8.3.7.0 Introduced on the S4810.
Version 8.3.1.0 Introduced on the S-Series.
ccm transmit-interval
Configure the transmit interval (mandatory). The interval specified applies to all maintenance endpoints (MEPs) in the
domain.
S-Series, S4810
Syntax
ccm transmit-interval seconds
Parameters
seconds
Enter a transmit interval. The range is 1, 10, 60, and 600.
Defaults 10 seconds
Command Modes ECFM DOMAIN
Command History
Version 8.3.7.0 Introduced on the S4810.
207