Reference Guide

EF-7.4.2.0.bin
9 drwx 8192 Jan 01 1980 00:18:28 +00:00 diag
10 -rwx 29555751 May 12 2008 17:29:42 +00:00 FTOS-
EF-4.7.6.0.bin
11 -rwx 27959813 Apr 04 2008 15:05:12 +00:00 FTOS-
EF-7.5.1.0.bin
12 -rwx 4693 May 12 2008 17:24:36 +00:00 config051508
13 -rwx 29922288 Jan 11 2008 14:58:36 +00:00 FTOS-
EF-7.6.1.0.bin
14 -rwx 6497 Aug 22 2008 14:18:56 +00:00 startup-config
15 -rwx 5832 Jul 25 2008 11:13:36 +00:00 startup-config.bak
16 -rwx 29947358 Jul 25 2008 11:04:26 +00:00 FTOS-
EF-7.6.1.2.bin
17 -rwx 10375 Aug 25 2008 10:55:18 +00:00 LauraSave
flash: 520962048 bytes total (40189952 bytes free)
FTOS#
Related
Commands
show version – displays the FTOS version.
show linecard – displays the line card(s) status.
show environment (C-Series and E-Series) – displays the system component status.
show processes memory (C-Series and E-Series) – displays memory usage based on running
processes.
show tech-support (S-Series and Z-Series)
Display a collection of data from other show commands, necessary for Dell Force10 technical support to perform
troubleshooting on S-Series or Z-Series switches.
S-Series, Z-Series
Syntax
show tech-support [stack-unit unit-id | page]
Parameters
stack-unit (OPTIONAL) Enter the keywords stack-unit to view CPU memory
usage for the stack member designated by unit-id. The unit ID range
for the S4810 is 0-11. For all other S-Series, the range is 0-7.
page (OPTIONAL) Enter the keyword page to view 24 lines of text at a time.
Press the SPACE BAR to view the next 24 lines. Press the ENTER key
to view the next line of text.
When using the pipe command ( | ), enter one of these keywords to
filter command output. For details about filtering commands, refer to
CLI Basics.
save Enter the keyword save to save the command output.
flash: Save to local flash drive (flash://filename. A
maximum of 20 characters.
Command Modes EXEC Privilege
195