Reference Guide

Defaults none
Command Modes EXEC
Command History
Version 7.5.1.0 Introduced on the C-Series.
Example
FTOS# show switch links backplane
Switch fabric backplane link status:
SFM0 Links Status SFM1 Links
Status
LC SlotID Port0 | Port1 | Port2 | Port3 | Port4 | Port5 |
Port6 | Port7
0 up up up up down down down
down
1 not present
2 not present
3 not present
4 not present
5 not present
6 up up up up down down down
down
7 not present
up - Both ends of the link are up
down - Both ends of the link are down
up / down - SFM side up and LC side down
down / up - SFM side down and LC side up
FTOS#
show system (S-Series and Z-Series)
Display the current status of all stack members or a specific member.
S-Series, Z-Series
Syntax
show system [brief | stack-unit unit-id | stack-ports {status |
topology}]
Parameters
brief (OPTIONAL) Enter the keyword brief to view an abbreviated list of
system information.
stack-unit unit-id (OPTIONAL) Enter the keywords stack-unit followed by the stack
member ID for information on that stack member. The unit ID range
for the S4810 is 0-11. For all other S-Series, the unit ID range is 0-7.
stack-ports
status | topology
(OPTIONAL) Enter the keywords stack-ports for information
about the status or topology of the S4810 stack ports.
NOTE: This option applies to the S4810 only.
189