Reference Guide

pre-Version
6.2.1.1
Introduced on the E-Series.
Usage
Information
Dell Force10 recommends keeping the default setting for this command. If you do change the
time interval between VRRP advertisements on one router, you must change it on all routers.
description
Configure a short text string describing the VRRP group.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
description text
To delete a VRRP group description, use the no description command.
Parameters
text Enter a text string up to 80 characters long.
Defaults Not enabled.
Command Modes VRRP
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.2.1.1
Introduced on the E-Series.
disable
Disable a VRRP group.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
disable
To re-enable a disabled VRRP group, use the no disable command.
Defaults
• C and S-Series default: VRRP is enabled.
• E-Series default: VRRP is disabled.
1654