Reference Guide

brief (OPTIONAL) Enter the keyword brief to view a table of information
on the VRRP groups on the E-Series.
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 8.3.10.0 Introduced on the S4810.
Version 8.3.2.0 Introduced on the E-Series TeraScale.
Usage
Information
The following describes the show vrrp ipv6 command shown in the Example below.
Line Beginning with Description
GigabitEthernet... Displays the Interface, the VRRP group ID, and the network address.
If the interface is no sending VRRP packets, 0.0.0.0 appears as the
network address.
VRF VRF instance to which the interface (on which the VRRP group is
configured) belongs.
State: master... Displays the interface’s state:
• Na/If (not available).
• master (MASTER virtual router).
• backup (BACKUP virtual router).
the interface’s priority and the IP address of the MASTER.
Hold Down:... This line displays additional VRRP configuration information:
• Hold Down displays the hold down timer interval in seconds.
• Preempt displays TRUE if preempt is configured and FALSE if
preempt is not configured.
• AdvInt displays the Advertise Interval in seconds.
Adv rcvd:... This line displays counters for the following:
• Adv rcvd displays the number of VRRP advertisements
received on the interface.
• Adv sent displays the number of VRRP advertisements sent
on the interface.
• Bad pkts rcvd displays the number of invalid packets
received on the interface.
Virtual MAC address Displays the virtual MAC address of the VRRP group.
Virtual IP address Displays the virtual IP address of the VRRP router to which the
interface is connected.
Tracking states... Displays information on the tracked interfaces or objects configured
for a VRRP group (track command), including:
1651