Reference Guide

Item Description
• Gratuitous ARP sent displays the number of gratuitous ARPs
sent.
Virtual MAC address Displays the virtual MAC address of the VRRP group.
Virtual IP address Displays the virtual IP address of the VRRP router to which the
interface is connected.
Authentication:... States whether authentication is configured for the VRRP group. If it
is, the authentication type and the password are listed.
Tracking states.. This line is displayed if the track command is configured on an
interface. Below this line, the following information on the tracked
interface is displayed:
• Dn or Up states whether the interface is down or up.
• the interface type slot/port information.
Example
FTOS>show vrrp
------------------
GigabitEthernet 12/3, VRID: 1, Net: 10.1.1.253
State: Master, Priority: 105, Master: 10.1.1.253 (local)
Hold Down: 0 sec, Preempt: TRUE, AdvInt: 1 sec
Adv rcvd: 0, Adv sent: 1862, Gratuitous ARP sent: 0
Virtual MAC address:
00:00:5e:00:01:01
Virtual IP address:
10.1.1.252
Authentication: (none)
Tracking states for 1 interfaces:
Up GigabitEthernet 12/17 priority-cost 10
------------------
GigabitEthernet 12/4, VRID: 2, Net: 10.1.2.253
State: Master, Priority: 110, Master: 10.1.2.253 (local)
Hold Down: 10 sec, Preempt: TRUE, AdvInt: 1 sec
Adv rcvd: 0, Adv sent: 1862, Gratuitous ARP sent: 0
Virtual MAC address:
00:00:5e:00:01:02
Virtual IP address:
10.1.2.252
Authentication: (none)
Tracking states for 2 interfaces:
Up GigabitEthernet 2/1 priority-cost 10
Up GigabitEthernet 12/17 priority-cost 10
FTOS>
track
Monitor an interface and lower the priority value of the VRRP group on that interface if it is disabled.
C-Series, E-Series, S-Series (S50)
Syntax
track interface [priority-cost cost]
To disable monitoring, use the no track interface command.
1644