Reference Guide

all (OPTIONAL) Enter the keyword all to view a table with information
on all present line cards
brief (OPTIONAL) Enter the keyword brief to view an abbreviated list of
line card information.
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 8.1.1.0 Introduced on the E-Series ExaScale.
Version 7.5.1.0 Introduced on the C-Series.
E-Series Original command.
Usage
Information
show linecard
output Field
Description
Line card Displays the line card slot number (only listed in the show
linecard all command output).
Status Displays the line card’s status.
Next Boot Displays whether the line card is to be brought online at the next
system reload.
Required Type Displays the line card type configured for the slot. The Required Type
and Current Type must match. If they do not match, use the
linecard command to reconfigure the line card type.
Current Type Displays the line card type installed in the slot. The Required Type
and Current Type must match. If they do not match, use the
linecard command to reconfigure the line card type.
Hardware Rev Displays the chip set revision.
Num Ports Displays the number of ports in the line card.
Up Time Displays the number of hours and minutes the card is online.
FTOS Version Displays the operating software version.
Jumbo Capable Displays Yes or No indicating if the line card can support Jumbo
frames.
Boot Flash Ver Displays the two possible Bootflash versions. The [Booted] keyword
next to the version states which version was used at system boot.
Memory Size List the memory of the line card processor.
Temperature Displays the temperature of the line card. Minor alarm status if the
temperature is over 65° C.
Power Status Lists the type of power modules used in the chassis:
• AC = AC power supply
163