Reference Guide

Defaults none
Command Modes CONFIGURATION
Command History
Version 8.1.1.0 Introduced on the E-Series ExaScale.
Version 7.8.1.0 Output expanded to include SFP+ media on the C-Series.
Version 7.7.1.0 Vendor field removed from output of the show inventory
media command.
Version 7.5.1.0 Introduced on the C-Series and expanded to include transceiver
media.
Version 6.2.1.0 Expanded to include the Software Protocol Configured
field on the E-Series.
Version 5.3.1.0 Introduced on the E-Series.
Usage
Information
The show inventory media command provides some details about installed pluggable
media (for example, SFP and XFP). Use the
show interfaces command to get more details
about installed pluggable media.
Example
The display output might include a double asterisk (**) next to the SFMs.
...
0 CC-E-SFM ** 0004875 7490007411 A
1 CC-E-SFM ** 0004889 7490007411 A
...
The double asterisk generally indicates the SFM’s frequency capabilities, indicating either that
they are operating at 125 MHz or that the frequency capability, which is stored in an EPROM,
cannot be determined.
If there are no fibre ports in the line card, just the header under show inventory media
is displayed. If there are fibre ports but no optics inserted, the output displays "Media not
present or accessible".
Example (C300)
FTOS# show inventory
Chassis Type : C300
Chassis Mode : 1.0
Software Version : FTOS-EF-7.6.1.0
Slot Item Serial Number Part Number Revision
-----------------------------------------------
C300 TY000001400 7520029999 04
3 LC-CB-GE-48T FX000020075 7520036700 01
0 LC-CB-RPM 0060361 7520029300 02
0 CC-C-1200W-AC N/A N/A N/A
1 CC-C-1200W-AC N/A N/A N/A
0 CC-C300-FAN
* - standby
Software Protocol Configured
-------------------------------------------------
OSPF
FTOS#
159