Reference Guide

Auto reboot Stack-unit: Enabled
Auto failover limit: 3 times in 60 minutes
-- Stack-unit Failover Record --
------------------------------------------------
Failover Count: 0
Last failover timestamp: None
Last failover Reason: None
Last failover type: None
-- Last Data Block Sync Record: --
------------------------------------------------
Stack Unit Config: succeeded Jul 11 2012 09:42:35
Start-up Config: succeeded Jul 11 2012 09:42:35
Runtime Event Log: succeeded Jul 11 2012 09:42:35
Running Config: succeeded Jul 11 2012 09:42:35
ACL Mgr: succeeded Jul 11 2012 09:42:35
LACP: no block sync done
STP: no block sync done
SPAN: no block sync done
Related
Commands
redundancy disable-auto-reboot – prevents the system from auto-rebooting if it fails.
show system stack-ports
Display information about the stacking ports on all switches in the S-Series stack.
S-Series
Syntax
show system stack-ports [status | topology]
Parameters
status (OPTIONAL) Enter the keyword status to display the command
output without the Connection field.
topology (OPTIONAL) Enter the keyword topology to limit the table to just
the Interface and Connection fields.
Defaults none
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 7.7.1.0 Introduced on the S-Series.
Usage
Information
The following describes the show interfaces command shown in the Example below.
1544