Reference Guide

Defaults 7 or debugging
Command Modes CONFIGURATION
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
E-Series legacy
command
Related
Commands
default logging monitor – returns the logging monitor parameters to the default setting.
logging on
Specify that debug or error messages are asynchronously logged to multiple destinations, such as the logging buffer,
Syslog server, or terminal lines.
C-Series, E-Series, S-Series, Z-Series
Syntax
logging on
To disable logging to logging buffer, Syslog server and terminal lines, use the no logging
on command.
Defaults Enabled.
Command Modes CONFIGURATION
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
E-Series legacy
command
Usage
Information
When you use the no logging on command, messages are logged only to the console.
Related
Commands
logging – enables logging to the Syslog server.
logging buffered – sets the logging buffered parameters.
logging console – sets the logging console parameters.
logging monitor – sets the logging parameters for the terminal connections.
1528