Reference Guide

Usage
Information
When you configure the snmp-server trap-source command, the system messages
logged to the history table are also sent to the SNMP network management station.
Related
Commands
show logging – displays information logged to the history buffer.
logging history size
Specify the number of messages stored in the FTOS logging history table.
C-Series, E-Series, S-Series, Z-Series
Syntax
logging history size size
To return to the default values, use the no logging history size command.
Parameters
size Indicate a value as the number of messages to be stored. The range
is 0 to 500. The default is 1 message.
Defaults 1 message
Command Modes CONFIGURATION
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
E-Series legacy
command
Usage
Information
When the number of messages reach the limit you set with the logging history size
command, older messages are deleted as newer ones are added to the table.
Related
Commands
show logging – displays information logged to the history buffer.
logging monitor
Specify which messages are logged to Telnet applications.
C-Series, E-Series, S-Series, Z-Series
Syntax
logging monitor [level]
To disable logging to terminal connections, use the no logging monitor command.
Parameters
level Indicate a value from 0 to 7 or enter one of the following parameters:
emergencies, alerts, critical, errors, warnings,
notifications, informational, or debugging. The default
is 7 or debugging.
1527