Reference Guide

default logging monitor
Return to the default settings for messages logged to the terminal.
C-Series, E-Series, S-Series, Z-Series
Syntax
default logging monitor
Defaults level = 7 or debugging
Command Modes CONFIGURATION
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
E-Series legacy
command
Related
Commands
logging monitor – sets the logging monitor parameters.
terminal monitor – sends system messages to the terminal/monitor.
default logging trap
Return to the default settings for logging messages to the Syslog servers.
C-Series, E-Series, S-Series, Z-Series
Syntax
default logging trap
Defaults level = 6 or informational
Command Modes CONFIGURATION
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
E-Series legacy
command
Related
Commands
logging trap – limit messages logged to the Syslog servers based on severity.
1522