Reference Guide

• config—Notification of changes to the startup or running
configuration.
• ecfm—Notification of changes to ECFM.
• ecmp—Enable an ECMP trap to notify of ECMP or link
bumdle traffic imbalances.
• envmon—For Dell Force10 device notifications when an
environmental threshold is exceeded.
• isis—Notification of intermediate service traps.
• lacp—Notification of changes.
• snmp—Notification of RFC 1157 traps.
• stp—Notification of a state change in the spanning tree
protocol (RFC 1493).
• vlt—Notification of virtual link trunking.
• vrrp—Notification of a state change in a VRRP group.
• xstp—Notification of a state change in MSTP (802.1s),
RSTP (802.1w), and PVST+.
notification-
option
For the envmon notification-type, enter one of the following optional
parameters:
• cam-utilization
• fan
• supply
• temperature
For the snmp notification-type, enter one of the following optional
parameters:
• authentication
• coldstart
• linkdown
• linkup
Defaults Not enabled.
Command Modes CONFIGURATION
Command History
Version 9.1(0.0) Added support for copy-config and ecmp traps.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 8.4.1.0 Added support for VRRP traps.
Version 7.6.1.0 Added support for STP and xSTP traps. Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
E-Series legacy
command
1508