Reference Guide

show protocol-tunnel

Display protocol tunnel information for all or a specified VLAN-Stack VLAN.

C-Series, E-Series, S-Series, Z-Series, S4810

Syntax

show protocol-tunnel [vlan vlan-id]

Parameters

vlan

vlan-id

(OPTIONAL) Enter the keyword vlan followed by the VLAN ID to

display information for the one VLAN. The range is 1 to 4094.

Defaults none

Command Modes EXEC

Command History

Version 8.3.11.1 Introduced on the Z9000.

Version 8.3.7.0 Introduced on the S4810.

Version 8.2.1.0 Introduced on the C-Series, E-Series and E-Series ExaScale.

Version 7.4.1.0 Introduced

Example

FTOS#show protocol-tunnel

System Rate-Limit: 75 frames/second

VLAN Protocols Interface

1000 STP,PVST Gi 5/7,Gi 5/6

1001 LLDP,GVRP Gi 5/7,Gi 5/6

1002 MMRP,MVRP Gi 5/7,Gi 5/6

1003 LACP,DOT1X Gi 5/7,Gi 5/6

1004 OAM,PAUSE Gi 5/7,Gi 5/6

1005 E-LMI Gi 5/7,Gi 5/6

Example (Specific

VLAN)

FTOS#show protocol-tunnel vlan 2

System Rate-Limit: 1000 Frames/second

Interface Vlan Protocol(s)

Gi1/2 2 STP, PVST

FTOS#

Commands

show running-config – displays the current configuration.

1488