Reference Guide

Usage
Information
FTOS must have the default CAM profile with the default microcode before you enable L2PT.
protocol-tunnel rate-limit
Enable traffic rate limiting per box.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
protocol-tunnel rate-limit rate
To reset the rate limit to the default, use the no protocol-tunnel rate-limit rate
command.
Parameters
rate Enter the rate in frames per second. The range is 75 to 3000. The
default is 75.
Defaults 75 frames per second.
Command Modes CONFIGURATION
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 8.2.1.0 Introduced on the C-Series, E-Series Terascale, and E-Series
ExaScale. Maximum rate limit on E-Series reduced from 4000 to 3000.
Version 7.4.1.0 Introduced
Example
FTOS#
FTOS#conf
FTOS(conf)#protocol-tunnel rate-limit 1000
FTOS(conf)#
Related
Commands
show protocol-tunnel – displays tunneling information for all VLANs.
show running-config – displays the current configuration.
1487