Manualshelf

Reference Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S4810P
1481148214831484148514861487148814891490
protocol-tunnel destination-mac
Overwrite the BPDU destination MAC address with a specific value.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
protocol-tunnel destination-mac xstp address
Parameters
stp Change the default destination MAC address used for L2PT to another
value.
Defaults The default destination MAC is 01:01:e8:00:00:00.
Command Modes CONFIGURATION
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 8.2.1.0 Introduced on the C-Series, and S-Series.
Version 7.4.1.0 Introduced
Usage
Information
When you enable VLAN-Stacking, no protocol packets are tunneled.
Related
Command
show protocol-tunnel – displays tunneling information for all VLANs.
protocol-tunnel enable
Enable protocol tunneling globally on the system.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
protocol-tunnel enable
To disable protocol tunneling, use the no protocol-tunnel enable command.
Defaults Disabled.
Command Modes CONFIGURATION
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.4.1.0 Introduced
1486