Reference Guide

radius-server retransmit
Configure the number of times the switch attempts to connect with the configured RADIUS host server before declaring
the RADIUS host server unreachable.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
radius-server retransmit retries
To configure zero retransmit attempts, use the no radius-server retransmit
command.
To return to the default setting, use the radius-server retransmit 3 command.
Parameters
retries Enter a number of attempts that FTOS tries to locate a RADIUS server.
The range is zero (0) to 100. The default is 3 retries.
Defaults 3 retries
Command Modes CONFIGURATION
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.2.1.0
Introduced on the E-Series.
Related
Commands
radius-server host – configures a RADIUS host.
radius-server timeout
Configure the amount of time the RADIUS client (the switch) waits for a RADIUS host server to reply to a request.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
radius-server timeout seconds
To return to the default value, use the no radius-server timeout command.
Parameters
seconds Enter the number of seconds between an unsuccessful attempt and
the FTOS times out. The range is zero (0) to 1000 seconds. The default
is 5 seconds.
Defaults 5 seconds
Command Modes CONFIGURATION
1449