Reference Guide

radius-server key – configures a key for all RADIUS communications between the switch and
the RADIUS host server.
tacacs-server key – configures a key for communication between a TACACS+ server and
client.
username – establishes an authentication system based on user names.
password-attributes
Configure the password attributes (strong password).
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
password-attributes [min-length number] [max-retry number]
[character-restriction [upper number] [lower number] [numeric
number] [special-char number]]
To return to the default, use the no password-attributes [min-length number]
[max-retry number] [character-restriction [upper number] [lower
number] [numeric number] [special-char number]] command.
Parameters
min-length
number
(OPTIONAL) Enter the keywords min-length followed by the
number of characters. The range is 0 to 32 characters.
max-retry number (OPTIONAL) Enter the keywords max-retry followed by the
number of maximum password retries. The range is 0 to 16.
character-
restriction
(OPTIONAL) Enter the keywords character-restriction to
indicate a character restriction for the password.
upper number (OPTIONAL) Enter the keyword upper followed the upper number.
The range is 0 to 31.
lower number (OPTIONAL) Enter the keyword lower followed the lower number.
The range is 0 to 31.
numeric number (OPTIONAL) Enter the keyword numeric followed the numeric
number. The range is 0 to 31.
special-char
number
(OPTIONAL) Enter the keywords special-char followed the
number of special characters permitted. The range is 0 to 31.
Defaults none
Command Modes CONFIGURATION
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
Version 6.3.1.0 Introduced on the E-Series.
1439