Reference Guide

Use this parameter only with a password that you copied from the
show running-config file of another Dell Force10 router.
password Enter a text string, up to 32 characters long, as the clear text
password.
Defaults Not configured.
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.1.1.0
Introduced on the E-Series.
Usage
Information
Only Dell Force10 Technical Support staff use this command.
enable secret
Change the password for the enable command.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
enable secret [level level] [encryption-type] password
To delete a password, use the no enable secret [encryption-type] password
[level level] command.
Parameters
level level (OPTIONAL) Enter the keyword level followed by a number as the
level of access. The range is 1 to 15.
encryption-type
(OPTIONAL) Enter the number 5 or 0 as the encryption type.
Enter a 5 followed by a text string as the hidden password. The text
string must be a password that was already encrypted by a Dell
Force10 router.
Use this parameter only with a password that you copied from the
show running-config file of another Dell Force10 router.
password Enter a text string, up to 32 characters long, as the clear text
password.
Defaults No password is configured. level = 15.
Command Modes CONFIGURATION
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
1436