Reference Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S4810P

1381

pre-Version

6.2.1.1

Introduced on the E-Series.

Usage

Information

To redistribute the default route (0.0.0.0/0), configure the default-information

originate command.

Commands

default-information originate – generates a default route for RIP traffic.

redistribute isis

Redistribute routing information from an IS-IS instance.

C-Series, E-Series, S4810

Syntax

redistribute isis [tag] [level-1 | level-1-2 | level-2] [metric

metric-value] [route-map map-name]

To disable redistribution, use the no redistribute isis [tag] [level-1 |

level-1-2 | level-2] [metric

metric-value] [route-map map-name]

command.

Parameters

tag

(OPTIONAL) Enter the name of the IS-IS routing process.

level-1 (OPTIONAL) Enter the keywords level-1 to redistribute only IS-IS

Level-1 routes.

level-1-2 (OPTIONAL) Enter the keywords level-1-2 to redistribute both IS-

IS Level-1 and Level-2 routes.

level-2 (OPTIONAL) Enter the keywords level-2 to redistribute only IS-IS

Level-2 routes.

metric

metric-

value

(OPTIONAL) Enter the keyword metric followed by a number as the

metric value. The range is 0 to 16.

route-map

map-

name

(OPTIONAL) Enter the keywords route-map followed by the name

of a configured route map.

Defaults Not configured.

Command Modes ROUTER RIP

Command History

Version 8.3.7.0 Introduced on the S4810.