Reference Guide

Defaults none
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.7.1.1 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.1.1.1
Introduced on the E-Series.
Usage
Information
You can use the show qos statistics command on the C-Series, but the keyword
wred-profile must be omitted in the syntax. The show qos statistics output
command differs from the ED and EE series line cards and the EF series line cards. The QoS
statistics for the EF series generates two extra columns, Queued Pkts and Dropped Pkts
(Example 2).
NOTE: The show qos statistics command displays Matched Packets and
Matched Bytes. The show queue statistics egress command (E-Series only)
displays Queued Packets and Queued Bytes. The following example explains how these
two displays relate to each other:
• 9000 byte size packets are sent from Interface A to Interface B.
• The Matched Packets on Interface A are equal to the Queued Packets on
Interface B.
• Matched bytes on Interface A = matched packets *9000
• Queued bytes on Interface B = queued packets *(9020)—Each packet has an
additional header of 20 bytes.
Example (ED, EE)
FTOS#show qos statistics
Interface Gi 0/0
Queue# Queued Bytes Matched Pkts Matched Bytes
0 0 0 0
1 0 0 0
2 0 0 0
3 0 0 0
4 0 0 0
5 0 0 0
6 0 0 0
7 0 0 0
Interface Gi 0/1
Queue# Queued Bytes Matched Pkts Matched Bytes
0 0 0 0
1 0 0 0
2 0 0 0
3 0 0 0
4 0 0 0
5 0 0 0
1360