Reference Guide

Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the C-Series and S-Series.
pre-Version
6.1.1.1
Introduced on the E-Series.
Example
FTOS#show qos qos-policy-output
Qos-policy-output qosOut
Rate-limit 50 50 peak 50 50
Wred yellow 1
Wred green 1
show qos statistics
View QoS statistics.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
show qos statistics {wred-profile [interface]} | [interface]
Parameters
wred-profile
interface
Platform—E-Series Only: Enter the keywords wred-profile and
optionally one of the following keywords and slot/port or number
information:
• For a Fast Ethernet interface, enter the keyword
FastEthernet followed by the slot/port information.
• For a Gigabit Ethernet interface, enter the keyword
GigabitEthernet followed by the slot/port information.
• For a SONET interface, enter the keyword sonet followed by
the slot/ port information.
• For a Ten Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port
information.
interface Enter one of the following keywords and slot/port or number
information:
• On the C-Series and E-Series, For a Fast Ethernet interface,
enter the keyword FastEthernet followed by the slot/port
information.
• For a Gigabit Ethernet interface, enter the keyword
GigabitEthernet followed by the slot/port information.
• For a SONET interface, enter the keyword sonet followed by
the slot/ port information.
• For a Ten Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port
information.
1359