Reference Guide

Example (Without
Trust)
FTOS#sh cam layer3-qos interface gigabitethernet 2/1
Cam Port Dscp Proto Tcp Src Dst SrcIp DstIp DSCP
Queue
Index Flag Port Port Marking
--------------------------------------------------------------
23488 1 56 0 0x0 0 0 0.0.0.0/0 0.0.0.0/0 - 7
23489 1 48 0 0x0 0 0 0.0.0.0/0 0.0.0.0/0 - 6
23490 1 40 0 0x0 0 0 0.0.0.0/0 0.0.0.0/0 - 5
23491 1 0 IP 0x0 0 0 10.1.1.1/32 20.1.1.1/32 - 0
23492 1 0 IP 0x0 0 0 10.1.1.1/32 20.1.1.2/32 - 0
24511 1 0 0 0x0 0 0 0.0.0.0/0 0.0.0.0/0 - 0
FTOS#
Example
(Summary)
FTOS#show cam layer3-qos linecard 13 port-set 0 summary
Total number of CAM entries for Port-Set 0 is 100
FTOS#
show qos class-map
View the current class map information.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
show qos class-map [class-name]
Parameters
class-name (Optional) Enter the name of a configured class map.
Defaults none
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.1.1.1
Introduced on the E-Series.
Example
FTOS#show qos class-map
Class-map match-any CM
Match ip access-group ACL
Related
Commands
class-map – identifies the class map.
1353